© 2023 by Jade&Andy. Proudly created with Wix.com

 

Features

Integral iGyro: triple-axis gyro system with heading function and set-up assistant

Six independent gyro outputs for: 2x ailerons, 2x elevators, 2x rudders

GPS-regulated gyro gain

Special regulatory algorithm for fixed-wing model aircraft

Extremely accurate triple-axis MEMS sensor

Integral Delta and V-tail mixer

Door sequencer: six freely programmable outputs with set-up assistant

PowerBus: 2 outputs, 16 + 2 channels, compatible with other servo bus systems

Servo-Match function: servo centre, end-points and reverse for all 24 servo outputs

SRS: Serial Receiver System provides the facility to use receivers with serial interface: Futaba S-Bus, Spektrum DSM2 und DSMX, Jeti, Multiplex M-Link, HoTT and JR X-BUS

Unrestricted channel assignment for all 24 PowerBox outputs

Graphic LCD screen with 128 x 64 pixels

Extremely user-friendly menu-based programming using the SensorSwitch

Up to 18 channels - depending on the radio control system in use

Signal amplification and interference suppression for all 24 outputs

Flight recorder, recording of lost frames, fail-safe events and all battery data

Variable frame rate, range 9ms – 21ms

Two 16-bit processors for fast, high-resolution signal processing

2 x double-regulated output voltages for receivers and servos

2 regulated voltage ranges with independent selection facility, 5.9V or 7.4V

Connection facilities for Futaba, Jeti, Spektrum, HoTT and Multiplex MSB downlink bus systems

Direct transmission of all battery informations, receiver data and GPS data to the transmitter

Separate voltage and capacity display for each battery

Minimum value memory alerts the user to voltage collapses

Large-area heat-sinks for high regulator performance

Regulator monitoring, regulator error indicator

Support for three battery types: LiPo, NiMH / NiCd, LiFePo

Suppression of any servo feedback currents which may occur

Updateable with PowerBox Systems USB Interface connectors

 

 

Technical Data

Operating voltage    4.0V - 9.0V

Power supply    2S LiPo, 2S LiIon, 2S LiFePo, 5S NiCd/NiMH

Current drain Power-on state    185mA (with LCD)

Current drain Standby    30µA

Maximum load current    Peak 4x20A

Drop-out voltage    0.3V

Output voltage    5.9V and/or 7.4V regulated

Signal input    serial

Supported RC systems    Spektrum, Futaba, HoTT, M-Link, Jeti, JR

Receiver redundancy    SRS

Channels    18

Servo sockets    24

Programmable servo outputs    24

Servo signal resolution    0.5µs

Signal frame rate    9ms, 12ms, 15ms, 18ms, 21ms

Integral gyro system    iGyro

Gyro regulation    Heading- and Normalmode

Gyro sensor type    MEMS

Number of sensor axes    3

Screen    LCD, backlite

Integral door sequencer    yes

Supported telemetry systems    Futaba, Jeti, Spektrum, HoTT, M-Link

Dimensions    136 x 82 x 20 mm

Weight    160g

Weight Sensor Switch    15g

Weight of LCD screen    65g

Temperature range    -30°C bis +75°C

 

 

Set contents

  • PowerBox Royal SRS
  • LCD screen
  • SensorSwitch
  • 2 three-core patch-leads, 180 mm
  • 4 retaining screws
  • 4 rubber grommets / brass spacer sleeves, fitted
  • Operating instructions in German and English 
  • GPS Sensor

PowerBox Royal SRS

$849Price